ECO-RS – A completely new sensation



The ECO-RS is one of the most recent machines developed at Reichenbacher Hamuel and available in two different sizes. Installation and start-up of the machining centre are as simple as never before, as almost all parts have been fixed to the machine and need not be removed for transportation or relocation. The special feature of the new series is the way how the components are fed into the machine. The ECO-RS is of the inclined-bed type, meaning that the table is fixed to the machine in an almost vertical position and can be swivelled.

The components are fed into the machine from the front, while machining takes place in the machine’s interior. As the table is inclined by 12°, the components are no longer placed and clamped horizontally, but almost vertically. Once the components are in place, the table will be swivelled by 180°. Here, safety is ensured by a scanner that covers the entire area. Thus, the operator will no longer have to wait for doors to open or similar things.

Jochen Graf
Project planning/ Sales
 
  Phone:    +49 (0) 9561 599-212
  Fax:          +49 (0) 9561 599-193
  jochen.graf@reichenbacher.de

JavaScript has to be enabled for this demonstration.

Technical features

Working units
One or two 5-axes working units that can be tilted by up to 44° and equipped with various head versions (star-shaped head with 3 milling spindles of 3.5 kW, each, or 3 milling / sawing spindles of 6.4 kW, each, or spindle for tool change with HSK-E32)

Tool changer
Tool changer plate with 12 places moving along the X, Y and Z axes

General features
Integrated chip conception with chip removal belt and ascending conveyor
Fully encased milling machine with rotary table and inclined machine bed (thus maximum working area at minimum base area)

Working areas
Working area ECO-RS 1 (X, Y, Z): 1,750 x 1,000 x 400 (550) mm
Working area ECO-RS 2 (X, Y, Z): 2,150 x 1,500 x 600 (750) mm
S pace requirements ECO-RS 1 (X, Y, Z): 5,700 x 2,300 x 2,700 mm
S pace requirements ECO-RS 2 (X, Y, Z): 6,700 x 3,000 x 3,600 mm

Control
Siemens Sinumerik 840D sl with operator surface HMI Operate

Types


Configuration

Examples of Use